Hand Crimp Tool for Mega-Fit Crimp Terminals
Doc. No: 2133091300
Release Date: 04-15-20
UNCONTROLLED COPY
Page 1 of 8
Revision: A
Revision Date: 04-15-20
INSULATION
CRIMP
▲
SEE NOTE
BRUSH
STRIP
LENGTH
BELL MOUTH
CRIMP HEIGHT
BEND
DOWN
BEND UP
ROLL
CONDUCTOR
CRIMP
TWIST
Application Tooling Specification
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator holds terminals in the proper crimping position
Right- or left-handed operation
Dies and locator from this tool can be used in the Battery Powered Tool Order No. 63816-0270
(110 V) or 63816-0280 (220 V), with the use of the 63816-0800 Crimp Head
This tool is IPC/WHMA-A-620 Class 2 compliant, as indicated on page 2
SCOPE
Products:
Mega-Fit Crimp Terminals, 14 AWG, UL1007 and UL1015 Wire.
Terminal Series
No.
Terminal Order No.
(Reel)
Wire
Insulation Diameter
Strip Length
Terminal
Wire Type Wire Size
mm
In.
mm
In.
76823
76823-0344
UL1015
14 AWG
2.30-3.58
.091-.141
4.60-5.20
.181-.205
UL1007
172063
172063-0334 172063-1334
UL1015
14 AWG
UL1007
105417
105417-0334
UL1015
14 AWG
UL1007
105418
105418-0314 105418-1314
UL1015
14 AWG
UL1007
Insulation diameter range for the terminal product design.
Customer to cut off terminals from reel: 0.20mm (.008”) maximum cut-off tab.
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed
in the scope.
Order Number
213309-1300
TYPE 4D