Molecular Devices SpectraMax 190, Руководство оператора

Страница: 32 / 54

Chapter 3
3-4 SPECTRAmax
190 Microplate Spectrophotometer Operator’s Manual
3) If the incubator is on, the LCD will show the current temperature along with
the temperature set point. To change the set point (to any setting from ambi-
ent +4° to 45°C), press either the up or down arrow above or below TEMP.
4) Select the desired measurement wavelength by pressing the up or down
arrow near
λ
. Scroll up or down through the list of wavelengths shown in the
LCD using the up or down arrows until the desired measurement wavelength
is highlighted.
5) Load the prepared microplate into the chamber. Press the
[READ]
key.
Due to the continuous changes in printer technology leading to
printer obsolescence and the ability of SOFTmax PRO software to
print on PC- and Macintosh-compatible printers, Molecular Devices
does not recommend reliance on printing in the stand-alone mode.
NOTE: