Introduction
SkanWasher 400 User Guide
3
Safety Features
The SkanWasher 400 is equipped with three sensors that help to safeguard
operation before the actual wash. When starting the program, the SkanWasher
400 automatically verifies the status of the following:
Pressure pump operating at the correct level
Microplate in the microplate lift
Space remaining in the waste reservoir
Sensors can be disabled through the Setup menu / Edit Options. Consult
page 20 for procedure.
Serial Number
The serial number of the unit can be found on the back panel of the
instrument.
Package Content
The SkanWasher 400 system includes the following:
SkanWasher 400 Instrument
Microplate lift
Tool kit, including probe cleaner and hex wrenches
Power cord
Instruction manual
Reservoir and Tubing
Buffer reservoir (4 L)
Rinse reservoir (4 L)
Waste reservoir (10 L) with level sensor and waste tubing (red)
Tubing set
Inlet tubing (blue and green)
Pressure tubing (yellow)
