Molecular Devices QPix 420, Руководство пользователя, Страница: 28 / 225

QPix 420 Colony Picking System User Guide
28 5031496 G
Wash Bath 3 (closest to the front): 1% sodium hypochlorite (bleach)
CAUTION! Bleach can cause corrosion if it is left in the instrument for too long. Remove
the bleach from the instrument immediately after its use. In general, bleach is required
only for difficult-to-sterilize organisms.
Changing the Head
The head is housed in a unique actuator system that permits easy exchange and set-up of the
head.
Although it is possible to manually move the actuator assembly, you should use the software to
safely move the actuator into position to remove or install the head.
WARNING! PINCH HAZARD.
The actuator assembly has moving parts that can
cause pinch injuries if it is moved manually. To prevent pinch injuries, use the software
Change Head process to safely move the actuator.
To change the head:
1. From the Navigation window under Utility Processes, double-click the Instrument Utilities
icon.
2. In the Instrument Utilities window, double-click the Change Head icon.
3. In the Change Head window, click Move to Load Position.
4. When the warning message displays, make sure that the bed is clear of obstructions and
that the door is closed, and then click OK to move the actuator into position near the front of
the instrument.
5. Open the door.
6. Install or remove the head without touching the camera or other electronics on the
underside of the actuator assembly.
7. Close the door.
8. In the Change Head window, click Move to Park Position.
9. When the message displays, make sure that the bed is clear of obstructions and that the
door is closed, and then click OK to home the actuator to its starting position.
10. Click Next.
11. In the Instrument Utilities window, click Next.