Molecular Devices FLIPR Tetra, Руководство пользователя, Страница: 15 / 302

FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 15
Minimum Space
System dimensions are as follows:
• Without Cell Suspension Module or TETRAcycler
™
:
approximately 39 inches wide  27 inches deep  70 inches high
(991 mm wide  686 mm deep  1780 mm high).
• With Cell Suspension Module and TETRAcycler: approximately
53 inches wide  27 inches deep  70 inches high (1346 mm
wide  686 mm deep  1780 mm high).
FLIPR
®
Tetra System is designed with rolling castors so it can be readily
moved to make necessary adjustments and perform maintenance.
Leveling feet are also installed on the lower instrument chassis. These
feet are typically used for stabilizing the instrument when integrated
with a robot, but can also be used to establish a uniform instrument
deck level in situations where the lab floor is not flat. When running an
experiment, please make sure the instrument’s feet are lowered and
leveled.
The computer and monitor are mounted to the right front side of the
instrument with the included clamp, requiring a minimum lab space of
73 inches (1.85 m) wide  82 inches (2.08 m) deep for maneuverability.
A chiller with dimensions 11 inches wide by 13 inches deep  13 inches
high (279 mm  330 mm  330 mm) is connected via a 3-foot (914
mm) long tube to the right side of the instrument. It can be placed
anywhere within that 3 foot radius as long as the user has access to the
on/off button on the chiller.
A minimum 25 inch (635 mm) square footprint for tip wash bottles is
required to the right side of the instrument.
The cabinet should have a user access space of 48 inches (1.22 m) in
front  24 inches
(610 mm) behind  10 inches (254 mm) to the left for servicing the
instrument.
WARNING! FLIPR
®
Tetra System can weigh as much as 860 lbs
(390 kg). Ensure adequate personnel are present when
installing or moving the system. Follow all necessary safety
precautions and use proper moving techniques.