7. Choose the timing of the trigger.
Rising edge: Triggers when the rising edge of the digital or analog
input occurs.
Falling edge: Triggers when the falling edge of the digital or analog
input occurs.
NOTE
The Time Only option is also available for stages other than stage 1..
8. Optional: Set a time delay in seconds.
9. Choose the checkmark to save the value.
10. Choose
Ramp
and enter a value.
11. Choose the checkmark to save the value.
6-15
OPERATION
E-Drive Controller User Manual
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
