6.6 Homing the System
For the system to identify open and closed positions for the valve pins, you must
home the system.
1. Choose a plate.
2. Choose the Home button.
When the Homing is complete, the following messages are displayed
sequentially.
Figure 6-1 Moving towards closed position hard stop
Figure 6-2 Plate1: Set home position
Figure 6-3 Plate 1: Moving towards open position hard stop
Figure 6-4 Plate 1: Moving to close position
After the homing is completed, the Main screen updates to:
Note:
• The Auto/Manual button is available.
• The Servo button is highlighted and enabled.
• The Jog and Home buttons are displayed and can be enabled once a
plate is selected.
6-11
OPERATION
E-Drive Controller User Manual
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
