MK105 User Manual
www.mokosmart.com
1
1. About This Manual
This document will briefly introduce the MK105 gateway plug and guide users how to operate the
gateway using mobile APP.
2. Product Introduction
2.1 Overview
MK105 is an IOT Bluetooth gateway plug that integrates WIFI and Bluetooth wireless technology. It
is based on ESP32 solution and is cost-effective.
The plug works as a BLE scanner to gather Bluetooth broadcast data of BLE device nearby, and
upload these data frames to MQTT server through 2.4Ghz WIFI. It is mainly used for position
tracking and BLE sensor monitoring.
2.2 Applications
Location tracking in room
Health/fitness monitoring in hospital
Environmental monitoring
Temperature sensor monitoring
Beacon & BLE Sensor & BLE device raw data collection
2.3 Button Operation
Short pressing button: to set the Bluetooth status. For devices that not connected to network,
short pressing button can set Bluetooth advertise/OFF, LED will flash
GREEN
/
OFF
.
Holding the button for 10s: to restore factory settings. In any situation, after the device is
powered up, long pressing the button for 10s, that will trigger device to reset. When LED
flashes
GREEN
and
BLUE
alternately once, that means device resets successfully.
