8
SPECIFICATIONS
Rated Voltage
20V d.c.
Max. Chuck Size
1/2
" (13mm)
Gear Shift
2 speeds
No-load Speed
0-440 / 0-1440 rpm
Recommended working
temperature
14~104°F (-10~40°C)
Recommended storage
temperature
32~104°F (0~40°C)
ASSEMBLY
REMOVABLE BELT CLIP
See Fig. 3
Your tool is equipped with a removable belt clip that
can be positioned on the left side of the tool for
convenient transport.
Install the belt clip onto the tool:
a.
Remove the battery pack from the tool.
b.
Align the rib of the belt clip with the threaded
hole on the base of the tool.
c.
Insert the screw and securely tighten the screw
with a screwdriver.
Remove the belt clip from the tool:
a.
Remove the battery pack from the tool.
b.
Use a screwdriver to loosen the screw that
attaches the belt clip to the hammer drill.
c.
Remove the screw and the belt clip.
NOTICE: Install or remove the belt clip as you need.
OPERATING INSTRUCTIONS
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-
containing products, etc. can cause a short circuit.
If any parts are damaged or missing,
do not operate this product until
the parts are replaced. Use of this product with
damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this tool
or
create
accessories
not
recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
injury.
To prevent accidental starting that
could cause serious personal injury,
always remove the battery pack from the tool when
assembling parts, making adjustments, or cleaning
the tool.
This cordless angle grinder must be used only with
the battery packs and charger listed below:
Battery Pack Selection:
B202010MZ(L),
B203005MZ(L),
B204005MZ(L),
B204010MZ(L).
Charger Selection:
C10MZ1US, C20M1US, C20MK1US.
NOTICE: Please refer to the battery and charger
manuals for detailed operating information.
FUEL GAUGE BATTERY PACKS
Some MOKENEYE battery packs include a fuel gauge
which consists of four green LED lights that indicate
11
LOCK (tighten)
KEYLESS
CHUCK
UNLOCK (release)
