ROLLATOR USER GUIDE INTRODUCTION
ALJ-009A-GRAY FRAME
ALJ-009B-RED FRAME
ALJ-008H-BLUE FRAME
All these 4-Wheeled Rollator Walkers are intended to be built lightweight. They are
designed to be portable as well as to aid user to walk, and as an option, to carry some
personal items. They come with either wire basket or fabric pouch.
These rollators are suitable for indoor and outdoor use. They provide a cost-effective
solution to some mobility problems whilst offering stability and security to the user.
USER GUIDE INSTRUCTIONS
1. To open your rollator, push the folding hinge (side braces) down until it locks securely
in a straight position.
2. Place both loose hand grips, with the pre-assembled deluxe loop brakes, into the
handlebar openings and adjust the desired height. To do this, remove the angular knob,
washer and screw from the handle bar. Insert, the screw, with the washer on it, through
the desired hole aligned in the rollator frame-rod and screw the angular knob back on
securely.
3. Insert the removable backrest into rollator frame securely by making sure the retainer
pins are locked into position through the frame hole.
4. Test and adjust the tension on the braking system mechanism to ensure proper and
secure braking system before use.
5. Secure the wire basket or fabric pouch in the proper location. Flip up the seat and
place the basket on the rollator crossbars or position the wire basket hooks over the
front bar (not shown).
6. Always ensure the side braces are fully down in full extension before using.
Page
1
of
2
