MOFI RECOVERY for
MOFI5500-5GXeLTE
This MOFI utility will restore your MOFI MOFI5500-5GXeLTE router back to working mode.
Note you will need a pc with an Ethernet cable if the MOFI WIFI RECOVERY does not load
There are possibly 2 ways to do the recovery on this MOFI5500 router
One is the Recovery where you can do this off wifi and the other is the basic mofi recovery
where you will need to do this with an Ethernet cable.
Before doing this, suggest you download and save the latest firmware
https://mofinetwork.com/mofi5500_downloads/
If you need to do the boot recovery, you will also need this recovery firmware
https://mofinetwork.com/firmware/MOFI5500/MOFI5500_RECOVERY.bin
Depending on what you load, you may over write the file to do the MOFI Wifi Recovery
To see if you can get into the mofi wifi recovery
Take Power off the router
Hold the reset button down
Connect the power back in the router
Keep holding the reset button (about 20 seconds) and first, you will see the 1
st
BLUE LED come
on.
Keep holding down and then about 5 more seconds and you should see both BLUE LED come
on,
Release the reset button
The router will reboot with only the power LED on.
Wait for about 1 min and then check your wifi and you should see the MOFI Recovery wifi show
up.
Connect to this and you can load the standard mofi firmware on this.
If this does not work, you can try the boot recovery which needs an ethernet cable to get this to
work
Step 1: Set router is recovery mode
Connect the router to your pc with an Ethernet cable to port 1 at the back of the router.
