CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
Valve Sold Separately
TS354sp: Rev. 6/11
CL
6-7/16"
(164mm)
7-7/8"
(200mm)
3-3/16"
(81mm)
4-1/2"
(114mm)
WALL OPENING
5-1/16"
(129mm)
6-15/16"
(176mm)
6'-6"
(1981mm)
Nominal
Floor Line
Face of Stud
Finished
Wall Line
2"Max. Wall
(51mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Divine™ Posi-Temp®
Single-Handle Tub/Shower (Trim Only)
Models:
TS350 series-valve trim only
TS352 series-shower trim only
TS354 series-tub/shower trim
Valve:
S932
M•pact
™
System
DESCRIPTION
- Metal construction with various finishes identified by suffix
- Includes 7” rainfall showerhead, arm, flange and diverter tub spout
- For use with S932 valve
OPERATION
- Handle operates counterclockwise through a 270° arc
with off at 6 o’clock and maximum hot at the 9 o’clock position.
Shut off in clockwise direction
- Adjustable temperature limit stop to control maximum hot
water temperature
- Pressure balancing mechanism maintains selected discharge
temperature to ± 3.6˚F (± 2˚C)
FLOW
- Showerhead is limited to 2.5 gpm max. (9.5 L/min)
- NH suffix models contain no showerhead
CARTRIDGE
- 1222 cartridge design
- Non me tal lic/nonferrous and stainless steel materials
- Accommodates back to back installations
STANDARDS
- Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein, including ASSE 1016
-
for lever handle
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
- 5 year warranty if used in commercial installations
ADA
