CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
NOTE:
50/50 or metal waste assembly models are
designed to be installed through 3 - 1” dia. holes
2” on center. Models less waste assembly are designed
to install through 2 - 1” min. dia. holes 4” on center
DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
1/2" IPS connections
•
Includes metal pop-up type waste assembly
OPERATION
•
Knob style handles
•
Rotate either handle counterclockwise to open and clockwise
to close
FLOW
•
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products
made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
•
1224 cartridge design
•
Nonmetallic and stainless steel material
STANDARDS
•
Third party certified to: WaterSense,® CSA B-125.1, ASME A112.18.1
and all applicable re quire ments ref er enced therein
•
Certified to ANSI/NSF 61/9
•
Contains no more than 0.25% weighted average lead content
•
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
•
5 year warranty if used in commercial installations
2-9/32"
(57mm)
2"
(50mm)
2"
(50mm)
HOT
1/2" NPT INLET
COLD
1/2" NPT INLET
ESCUTCHEON DIA.
6-1/4" x 2-19/32"
(159mm x 66 mm)
3/4" (19mm)
MAX. DECK
THICKNESS
3-11/32"
(85mm)
6-9/64"
(156mm)
1-13/64"
(30mm)
3-3/16"
(80mm)
4-11/32"
(110mm)
CHATEAU®
Two-Handle 4” Lavatory Faucet
With Metal Waste Assembly
Model:
4920 series
With 50/50 Waste Assembly
Bulk Pack Model (12 per Carton):
64920 series, 64919 series
Less Waste Assembly
Model:
4900
Bulk Pack (12 per Carton):
64900
Rev. 3/11
There is more than 1 version of this model.
Page down to identify the version you have.
