Moeller XION-PLC-CANopen, Оборудование, инженерия и описание функций

Страница: 45 / 54

02/05 AWB2724-1566GB
Procedure
41
Example
The example below illustrates the procedure for accessing a PLC
program.
You have connected the PC to the PLC with node ID “2” and want
to access the target PLC with node ID “3”.
X
Open the project of the target PLC (node ID 3) whose program
you wish to edit or test.
X
First configure the parameters for the hardware connection PC
n
PLC (node ID 2).
X
From the Online menu select Communication
Parameters... .
X
Click the New button under “local” channels.
The New Channel dialog appears.
X
Select the channel in the Device field.
XC200: Serial [RS232] [Level 2 Route] Tcp or
Ip [Level 2 Route].
X
In the Name field you can assign a new name, e.g.
“Rout_232”.
X
Confirm with OK and return to the original window.
You have now determined the parameters for the hardware
connection between the PC and the PLC (node ID 2).
Figure 68:CAN master parameters
Figure 69:CAN device parameters
Figure 70: Diagnostics possibilities
a XC100 with node ID 1
b XC200 with node ID 2
c
XN-PLC with node ID 3
Figure 71:Channel parameter setting
a b c
CANopen
XI/ON