Moeller ps4-201-mm1, Аппаратное обеспечение и инженерия

Страница: 55 / 94

Intelligent slaves
51
04/
99 AW
B
27-
1184 G
B
Table 10: Syntax for addressing slaves for expanding
remote inputs/outputs
Intelligent slaves When the master and an intelligent slave
communicate with one another, the application
determines which data is exchanged. You cannot
access the input/output operands directly. You must
therefore address the communication data using the
RD/SD syntax.
The table below shows the operands which are
available when the PS4-200 master PLC is operated
with intelligent slaves.
Table 11: Operand addressing of intelligent slaves
RD = Receive Data; defined receive data
SD = Send Data; defined send data
IL program
in ... Data
flow Ope-
rand Data
type Line Station Module Byte/
word Bits S 40 syntax
Master Master
↑
Slave 1
I Bit 1 1 1 0 7 LD % I1.1.1.0.7
Master
↑
Slave 2
IB Byte 1 2 0 0 – LD% IB1.2.0.0
Communication data
Operands Line Station Module Word/byte Bit
RD/SD 0, 1
(0 = master) 1 to 8
(0 = master) 0 to 6 0, 1, 2, ... (byte)
0, 2, 4, ... (word) 0 to 7
RDB/SDB –
RDW/SDW
Status/diagnostic
IS 0, 1
(0 = master) 1 to 8
(0 = master) 0 to 6 0, 1, 2, ... (byte) 0 to 7
ISB