Moeller PS 416-BGT-4 Series, Аппаратное обеспечение и инженерия, Страница: 58 / 150

55
02/98 AWB 27-1208-GB
PS 416-POW-4x0
5 Diagnostics
The LED on the front is lit if the connected supply is
active.
If the LED is not lit, check whether:
the mains supply is switched on
the fuse for the supply voltage has blown
the wiring is correct.
If the LED indicates that the mains supply is present,
and the system voltage is missing, this may be due
to the following:
the power supply card is not fitted properly in the
rack.
왘
Switch off the mains supply and insert the
card until you hear the card snap into position.
the card has a short-circuit or fault
왘
Switch off the mains supply.
왘
Contact your Moeller sales office.
The system voltage is not directly indicated via a
LED. If none of the LED on all the cards (except
power supply card) fitted in the rack are lit and the
mains supply is correctly applied to the power supply
card, the system voltage is missing.
For Immediate Delivery call KMParts.com at (866) 595-9616