Hardware & Tool required
Customer Service 908-368-1025 www.modway.com
Page 3/3
Hardware & Tool required
Hardware & Tool required
STEP 4:
Attach
Slat (7)
into
bed
by
inserting
CSK screw (C)
into the predrilled holes on the
Slat (7) .
Tighten with
Screwdriver (Not
provided) .
STEP 3
:
1. Attach the
Support Bar (6)
to the predrilled hole at center of
Headboard (1).
Place the
JCBC bolt 40MM(A
) and tighten by using
M4 Allen Key(E).
Repeat again at
Footboard(2).
2. Place the
Center Support bar (4)
as per picture shown and attach
JCBC bolt 40MM(A)
and tighten using
M4 Allen Key(E).
Repeat again at
Footboard(2)
3.Attach the
Adjuster(D)
to the
two
Center
Support Leg(5).
4. Attach the
Center Support Leg(5)
to the
Center support bar(4)
as shown in diagram., Insert
JCBC 40MM (A)
to the predrilled hole and tighten by
using
M4 Allen Key(E)
Cx6
Ex1
Dx3
Ax10
MOD-6048, MOD-6049
6
E
4
E
A
A
4
5
D
E
Assembly is completed. The bed is ready to enjoy now!
Screwdriver (Not provided) .
