background image

EEI –2870 

TABLE 

 

Customer Service 908-368-1025

www.modwayfurniture.com 

 

Page  1  of 10 

Thank you for purchasing the

 MODWAY TABLE

 

Before you start, here is some helpful advice: 

1.  We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step 

instructions. 

2.  Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or 

padded area, in the room that it is intended for. Approximate assembly time: 45 minutes. 

3

Please do not use any tools other than those provided or recommended in these instructions. 

4

Please do not throw away any of the packaging or the instruction until you have checked all the components 

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and 

environmentally friendly way. 

5

Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the 

components from time to time, so please save the tools that have been provided. 

6

Please keep all fitting out of reach of children. 

                                                     

  Hardware: 

A.

                  Bolt M8x40mm   x 12   

 

B.

                  Nut M8     x 4 

 

C.

                  

Double End Bolt M8x160mm 

x4 

 

D.

                  Flat Washer 

ø

8*18mm x 12 

 

E.

                  Allen Wrench M5 x1   

 
 
 

 

Component: 

 

 

 

 

 

 

 

 

 

 

Table Top x1           2  Top Rail x1        3  Left Side Panel x1          4  Right Side Panel x1

 

5  Middle Panel x1        6  Base x1           7  Bottom Panel x1 

Содержание EEI-2870











Отзывы: