Modulaire AM/FM Component Stereo System
(120-1469) Controls Faxback Doc. # 18931
POWER SWITCH
Depressing the white dot on the switch will turn the unit on, at which time
the dial will illuminate.
SELECTOR SWITCH
This switch will select the program source that will be reproduced by your
system.
AM
In this position, all standard AM broadcasts are reproduced.
FM MONO
In this position, all FM broadcasts will reproduced monaurally. If the
stereo indicator illuminates, it is an indication that the station is
transmitting stereo broadcasts.
FM STEREO
In this position, your system is capable of reproducing FM stereo
broadcasts in stereo. It will also reproduce monaural broadcasts
monaurally.
PH/TAPE
In this position, your system will reproduce either a tape or record
depending on the device that is being used.
VOLUME
Controls the loudness of the system, rotation in a clock, wise direction
increases the loudness and rotation in a counter-clockwise direction
decreases the loudness.
BALANCE
This control is used to balance any differences in level from left to right
channel due to difference in program material or associated equipment
Control should be set for approximately equal levels from your speakers.