Modena WF 0532 WSR, Руководство пользователя

Страница: 15 / 43

12
Before Use
Before using the washing machine for the first time, it is necessary to do
a washing cycle (program cotton) with detergent and without laundry,
setting the temperature at 60° C.
Electrical Connection
•
The appliance is supplied with a power cable and a Schuko plug
for the connection to the 230V/ 50Hz AC grid.
•
Make sure the Schuko plug is always accessible so that washing
machine can be disconnected from the mains if necessary. The
electrical system must meet the provisions VDE 0100. The
maximum consumption of the washing machine is 10 Ampere.
• It is strongly recommended to never connect the appliance using
extension cables, multiple sockets or similar devices in order to
avoid overheating and a potential
fi
re hazard. The manufacturer
accepts no liability for damages resulting from lack or
interruption of the protective earth conductor. With the purpose
of increasing the safety level, VDE institute, by Directive DIN VDE
0100 part 739, recommends to equip the appliance with an
automatic differential switch (circuit breaker) with trip off current
of 30mA (DIN VDE 0664).
•
If an automatic differential switch is used, make sure it is of type
A, in accordance with DIN VDE 0664 and sensitive to pulsating
currents.
•
The identi
fi
cation plate provides information about the nominal
power consumption and its appropriate protection. Please
compare these data with the data of the electrical mains.
This Appliance Requires an Earth Wiring
For individual personal safety and of the environment, this appliance
must be connected to the mains with an earthing which provides a direct
path to the ground, correctly veri
fi
ed and in compliance with current laws
and regulations. Its installation must be equipped with a magneto
thermal differential switch (circuit breaker).
•
This appliance is supplied with a type (A) power cord and a type
(B) plug.