Modena BC 1321 L, Руководство пользователя

Страница: 16 / 32

16
Beware Of Hot Surfaces
After turn off, the will show in the power setting indicator if cooking
zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. When in Standby mode, if the surface of cooking
zone is hot to touch, the letter “H” and “ - ” will show in i ts heat setting
indicator alternately.
Using Large Heating Area-Ceramic Hob
Some of ceramic hob models might have one or several extended
cooking zones (Oval/Dual/Triple zone), these extended zones can
provide larger cooking area and additional heat to fit for different size
of cooking pan.
NOTES:
1. After connected to electricity, when power on, the buzzer of
hob beeps once, all indicators light on for 1 second then off.
2. When the hob in Standby mode, if there is no practice within 1
minute, the electric hob will auto turn off, with buzzer beeps
once.
3. You can modify the heat setting at any time during cooking.
The heating element will turn off under power level 0, with
indicator shows “ - ”
4. The heat setting indicator of the selected zone will flash when
adjusting. After adjusting, the number in indicator will flash for
5 seconds and then stop flash, then the setting has been
confirmed.
5. If there is power cut off during cooking, all programmers
setting will be cancelled, you need to reset the programmer
again.
6. The cooling fan of induction hob will remain on for about 1
minute after the hob is turned off.