B
A
C
D
E
F
G
SER
VICE
22
D3 Gas Pipe Sizing
Gas pipe should be sized as per the requirements of AS/NZS 5601.1. The pipe sizing must be
sufficient to deliver the following volume of gas to the heater with all other gas appliances in the
home running at the same time:
Maximum KS1460 Single/Double Natural Gas Consumption = 41 MJ/hr
Maximum KS1460 Single/Double ULPG Consumption = 38 MJ/hr
D4 Gas Pipe Position
The gas connection is inside the appliance and is ½” male BSPT on the lower right of the appliance as
shown below. Access is through the silicone grommet circled below on the RH side of the chassis.
Access for connecting the gas supply to the gas connection point (shown in the diagram above)
should be through the access hatches located on the front and back of the appliance (the front as
shaded in the diagram below).
Gas Connection Point
