Mocon AMETEK Dansensor Lippke VC1400, Руководство пользователя

Страница: 94 / 104

92 User Guide EN Dansensor
®
Lippke VC1400
P/N 390262-B
02/2022
Compressed air supply
(“Vacuum Ejector” models only)
Hose dimensions Ø6/4 mm
1
Air supply pressure 4.5 - 6.0 bar
2
Air consumption Max. 60 l/min.
3
Air quality Dry, clean and free from oil

Compliant with DIN ISO 8573-1:2010 [4:4:3]
4
1
Ensure that the used hose type is appropriate for the required pressure

2
Optimal performance at approx. 5 bar

3
Depending on test settings

4
See "Pressure Regulator with filters" on page 17

Basic specifications
Vacuum chamber volume 400ml – 20L (headspace)
Pressure range (delta) Ejector: 100 – 800 mbar

Ext. vacuum: 100 – 900mbar
Pressure range (abs) Ejector: Down to 100 mbar abs.

Ext. vacuum: Down to 50 mbar abs.
Ambient temperature
1
Operation: +2 to +35 °C

Storage: - 20 to +60 °C
Ambient humidity
1
Operation: 10 to 90% RH, non condensing

Storage: < 95% RH, non condensing
Ambient pressure Operation: 900 - 1050 mbar
Pressure units mbar, mmHG or psi
Test time Vacuum test time: Up to 24 hours

Penetration time: Up to 24 hours
Calibration interval 12 months
1
If the device has been stored in a cold location and then moved to a warmer location then at least one hour of

acclimatization is required before switching on the unit.

If operated in a cold and high humidity environment it is advisable to let the device heat up for 30 minutes after is

has been switched on.
