manualshive.com logo in svg

Mocon AMETEK Dansensor Lippke VC1400, Руководство пользователя

Поделиться
Скачать
Mocon AMETEK Dansensor Lippke VC1400 Скачать руководство пользователя страница 82

80

User Guide

EN

Dansensor

®

 

Lippke 

VC1400

P/N 390262-B

02/2022

System Test

The 

System Test

 function can be used to test the main functions of the device.

NOTE! The function should typically be used to check the current values for a fully 
installed test system, ready to perform tests.

1. Press the 

 button to start the test.

The test checks the following:

Inlet vacuum sensor:

Shows the applied vacuum on the inlet port. With PU1400 or Vacuum Ejector this value 
is typically close to 0 mbar ±6 mbar, (e.g. pump is not started).

In case of connection to External vacuum this pressure will show the applied vacuum 
supply by the source.

Desiccator vacuum sensor:

Shows the pressure in the desiccator before the test is started. This value is typically 
close to 0 mbar ±4 mbar. Otherwise the pressure sensor is malfunctioning or chamber 
is not vented to atmospheric pressure.

Proportional valve opens at:

The proportional valve regulates the vacuum.

This value indicates at which level (%) a vacuum in the chamber starts to build up.

A higher value could indicate a leaking chamber. A hand on the lid can ensure an 
airtight seal.

Inlet sensor max vacuum:

This is how much vacuum the vacuum system is capable to supply.

Desiccator sensor max vacuum:

This shows the vacuum level which the VC1400 system is capable to obtain.

Time to reach max vacuum:

This value shows how long time it takes to reach max. vacuum in desiccator.

Too long time could indicate a defective or misplaced O-ring.

Leak rate:

Содержание AMETEK Dansensor Lippke VC1400









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды