Mocom Tethys H10, Руководство оператора, Страница: 47 / 86

EN OPERATOR'S MANUAL 47
WASHING CYCLE
DEFINED BY THE
USER (W1 CUSTOM)
In the washing cycle set by the customer it is possible to set the duration (time) of the
washing cycle among the selectable options.
WARNING
THE LOAD TREATED WITH THIS PROGRAMME IS NOT DISINFECTED.
USE THIS CYCLE ONLY AS A PREPARATION TO A SUBSEQUENT
THERMAL DISINFECTION PROGRAMME OR IF THE LOAD TO TREAT
CAN NOT BE TREATED AS A MINIMUM AT 80°C OR FOR MATERIALS
NOT CONTAMINATED AND NOT INTENDED TO COME INTO CONTACT
WITH PATIENTS.
AT THE END OF THIS PROGRAMME, HANDLE THE LOAD WITH CARE,
USING THE SUITABLE PERSONAL PROTECTIVE EQUIPMENT.
To set parameters select the key shown:
Hold down the key shown to access settings
1. Total cycle time
2. Washing time
3. Temperature set
4. Drying time
Select washing time and drying time.
After all these selections the estimated total time appears.
Use
key to save settings and go back to the previous screen.
Press START key to start the cycle defined by the user.