Mocom Tethys H10, Руководство оператора, Страница: 45 / 86

EN OPERATOR'S MANUAL 45
CUSTOM CYCLES
In addition to preset programmes (90° DISINFECTION, WASHING and PRE-WASHING) that
cannot be modified by the user, customizable programmes are available.
D1 CUSTOM and D2 CUSTOM are DISINFECTION programmes that can be set according
to the needs of the user.
W CUSTOM is a WASHING programme that can be set according to the needs of the user.
THERMAL
DISINFECTION
CYCLES SET BY THE
USER (D1 CUSTOM, D2
CUSTOM)
In thermal disinfection cycles set by the user the cycle can be customized by setting washing
temperature, A0 value, washing duration and drying duration.
It is possible to set A0 to a value lower than the default one (3000), remaining within the limits
of the prevailing standards.
Washing temperature can be set to 80°C or 90°C.
The duration of thermal disinfection cycle at 80°C with high A0 values increases of 10/15
minutes compared with D90 standard cycle.
To set parameters select the key shown:
Hold down the key shown to access settings
1. Total cycle time
2. Disinfection time
3. Drying time
4. A0 value
5. Temperature set