Mocom Tethys H10 Скачать руководство пользователя страница 43

Страница: 43 / 86

OPERATOR'S MANUAL

Start the cycle by pressing the button corresponding to WASHING CYCLE.

The cycle counter appears in the upper left corner.

WARNING

AT THE END OF THE CYCLE IT IS ESSENTIAL TO VISUALLY INSPECT

THE OBJECTS TO CHECK THEIR PROPER WASHING.

PRE-WASHING CYCLE

The pre-washing cycle is advised to avoid the drying of organic residues on the instruments

and facilitate their removal during the following washing or thermal disinfection cycle.

Rotary instruments, instruments made of untreated aluminium or with decorative anodizing

and instruments with ducts or cavities with reduced opening and high depth, are explicitly

excluded from use.

The reflective surfaces of mouth mirrors can be damaged by ultrasounds.

WARNING

THE LOAD TREATED WITH THIS PROGRAMME IS NEITHER

DISINFECTED NOR WASHED.

USE THIS CYCLE ONLY AS A PREPARATION TO A SUBSEQUENT

THERMAL DISINFECTION OR WASHING PROGRAMME.

AT THE END OF THIS PROGRAMME, HANDLE THE LOAD WITH CARE,

USING THE SUITABLE PERSONAL PROTECTIVE EQUIPMENT.

Содержание Tethys H10























































































Результаты поиска

Содержание Tethys H10

Отзывы:

Mocom Tethys H10, Руководство оператора, Страница: 43 / 86

Результаты поиска

Содержание Tethys H10

Отзывы: