Mocom Tethys H10 Скачать руководство пользователя страница 42

Страница: 42 / 86

OPERATOR'S MANUAL

WASHING CYCLE (W)

The washing process aims at eliminating organic and inorganic residues present on the

instruments at the end of their use and is suitable for almost all materials, except for the

porous, hygroscopic and water-soluble ones.

Rotary instruments, instruments made of untreated aluminium or with decorative anodizing

and instruments with ducts or cavities with reduced opening and high depth, are explicitly

excluded from use.

The reflective surfaces of mouth mirrors can be damaged by ultrasounds.

WARNING

THE LOAD TREATED WITH THIS PROGRAMME IS NOT DISINFECTED.

USE THE PRE-WASHING PROGRAMME ONLY AS A PREPARATION TO

A SUBSEQUENT THERMAL DISINFECTION PROGRAMME OR IF THE

LOAD TO TREAT CAN NOT BE TREATED AS A MINIMUM AT 80°C OR

FOR MATERIALS NOT CONTAMINATED AND NOT INTENDED TO COME

INTO CONTACT WITH PATIENTS.

AT THE END OF THIS PROGRAMME, HANDLE THE LOAD WITH CARE,

USING THE SUITABLE PERSONAL PROTECTIVE EQUIPMENT.

Содержание Tethys H10























































































Результаты поиска

Содержание Tethys H10

Отзывы:

Mocom Tethys H10, Руководство оператора, Страница: 42 / 86

Результаты поиска

Содержание Tethys H10

Отзывы: