Mocom Tethys H10, Руководство оператора, Страница: 20 / 86

20 OPERATOR'S MANUAL EN
FILLING OF SALT
RESERVOIR
The thermo-disinfector is equipped with an inner salt reservoir, used for regeneration of ion
exchange resins contained in the integrated water softening system.
At the first use after installation it is necessary to fill completely the reservoir with water, then
with salt.
Unscrew the salt reservoir plug, insert the supplied funnel, fill reservoir with water, and slowly
pour the salt up to the appearance of the salt at the plug level. Check that the maximum
reservoir filling level is not exceeded. At the end of the operation screw the plug in its seat
and wait for about 5 minutes until the salt is dissolved.
WARNING
USE NON-IODIZED COARSE SALT OR SALT FOR DISHWASHERS.
AT THE END OF THE FILLING OPERATION RINSE THE SURFACE WITH
CLEAN WATER AND REMOVE ALL TRACES OF SALT AND WATER
FROM THE SURFACE USING A CLOTH OR ABSORBENT PAPER.
WARNING
POSITION SALT FILLING FUNNEL SO THAT GUTTER IS FACING INSIDE
THE CHAMBER IN ORDER TO PREVENT WATER FROM BEING SPILLED
ON THE SURFACE.