NOTE:
Remove shipping pin
only after mechanism
and tray are inserted
into the mounted track.
TRAY SWIVELS FROM SIDE TO SIDE
8
For left hand use, slide out the mouse pad bar of the
KP6 from the mouse pad holder. Insert mouse pad
bar on the left side.
7
Slide the mechanism back to the bumper. Install the
track guard at the front end of the track using (3) #8
wood screws.
SHIPPING
PIN
Tip front of the KP6 tray up and begin to lower
mechanism to relieve pressure on the shipping pin.
Pull out the shipping pin.
6
Slide the KP6 tray and mechanism into the mounted
track.
5
MOUSE PAD
BAR HOLDER
MOUSE PAD BAR
15"
12 1/2"
5"
14"
7"
10 1/4"
PAGE 2 of 2
OPERATION PROCEDURES
CLOCKWISE
(ADJUST TRAY DOWN)
COUNTERCLOCKWISE
(ADJUST TRAY UP)
KPM2
TILT
WHEEL
TILT THE TRAY UP
TO UNLOCK AND
ADJUST TO
DESIRED HEIGHT.
TILT TRAY DOWN
TO SET THE HEIGHT.
PUSH AND
SLIDE
UNDER
DESK
SURFACE
TO HIDE
AWAY.
ADJUST TO THE
LOWEST HEIGHT.
KEYBOARD
RELEASE
LEVER
DEPRESS KEYBOARD
RELEASE LEVER TO
INSTALL OR REMOVE
KEYBOARD.
UNDERSIDE OF KP6
PART #
KP6/M2
