A
B1
B2
C1
C2
D
E
G
H
I
J
K
F
L
Hardware Supplied
Phillips & Flathead screwdrivers and hammer required
30mm
screw x20
12mm
screw x16
bolt & nut
set x32
14mm
screw x
56
18mm
screw x8
50mm
screw x16
dowel
x24
hinge
x4
wedge
x8
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
washer
x2
bracket
x2
stopper
x2
feet
x4
slide
rail x3
WARNING:
Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those
supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
M
12mm
screw x2
N
bracket
x4
O
P
Q
R
25mm
screw x2
14mm
screw x2
wall
plug x2
wall
strap x2
Wall Strap
Vigo Buffet
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
