A
B
C
D
E
F
H
I
J
G
Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
dowel
x26
bolt
x42
locking
nut x42
small
screw x16
long
screw x12
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Tahoe Change Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
x14
long screw
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
L + R
slide rail
x4
L + R
slide rail
x4
mocka.co.nz | mocka.com.au
2
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
40
nut
x4
long
screw x4
K
cover
x12
