A
B
C
D
E
F
G
H
J
K
L
I
Hardware Supplied
dowel
x16
screw
x4
bolt
x8
locking
nut x8
screw
x10
screw
x12
nut
x10
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
x1
washer
Z
screw
x1
Y
wall
anchor
x1
X
Safety
Strap
W
x1
WARNING:
Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
Phillips & Flathead screwdriver and hammer required
Wall Strap
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
bolt
x10
M
N
bolt
x2
dowel
x2
O
dowel
x2
Maya Desk
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
