Phillips & Flathead screwdrivers required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall materials may require
different fixing devices from those supplied.
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
wall
screw
x1
A
B
C
D
E
F
G
H
J
K
L
M
N
I
O
Hardware Supplied
P
Q
R
dowel
x20
screw
x41
bolt
x24
locking
nut x24
bolt
x4
screw
x5
slide
rail x1
wedge
x12
slide
rail x1
slide
rail x1
slide
rail x1
allen
key x1
bracket
x3
cover
x3
stopper
x3
hinge
x4
small
bolt x16
bracket
x4
S
T
screw screw
x10
x12
U
adjuster
x1
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A1
washer
x16
Kennedy Entertainment Unit
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
