Hatcher Desk
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
bolt and nut
set x12
F
12mm
screw x19
G
hook
x2
H
holder
x1
I
organiser
top x1
J
feet
x4
B
12mm
screw x3
Phillips and Flathead screwdrivers required.
Hardware Supplied
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
C
30mm
screw x10
D
50mm
screw x4
E
50mm
screw x4
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those supplied.
K
L
M
wall plug
x2
25mm
screw x2
safety
strap x2
