96
/128
M25 Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
3.2.4 Starting the Camera with Factory (Network) Settings
In certain situations, it may become necessary to start the camera with its default settings
for the network (DHCP client and additional 10.x.x.x IP address) and for the other param-
eters. This could be the case, for example, if the IP address has been lost or the camera
cannot be accessed using the last known IP address. In order to start the camera with the
factory default settings for all parameters (with the exception of users and passwords),
proceed as follows:
1. If the camera is powered on, disconnect the power supply by unplugging the cor-
responding cables and then reconnect the power supply.
2. Wait until both LEDs light up simultaneously for the first time.
3.
Press the L key within the next four seconds and hold it down
(if you need to
try again, go back to Step 1). Use a
paper clip
for this purpose but
avoid using
sharp or pointed objects!
4.
After about 30 to 45 seconds
, the camera emits a single sound
(“boing”)
.
The camera has finished booting and can now be used (e.g., MxManagementCenter,
MOBOTIX App, web browser).
Notes
If you use the camera’s
L key
to load the factory configuration, this configuration is
not automatically saved in the camera’s flash memory. When the camera is next
rebooted without using the
L key
, the last stored configuration will be used. To per-
manently store the new configuration in the camera’s flash memory, open
Admin
Menu > Store
. Note that you can restore specific parts of the camera configuration
afterwards by using “Restore” to re-apply the settings still stored in the camera.
As opposed to resetting the camera using
Admin Menu > Reset configuration
to factory defaults
, the user information will
not
be reset if the camera is booted
using the factory settings.
Press “L” key
Make sure you store
the default network
configuration to the
permanent flash memory
Содержание M25 SERIES
Страница 19: ...19 128 M25 Allround MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 85: ...85 128 MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com Notes...
Страница 125: ...125 128 Additional Notes MOBOTIX AG Security Vision Systems Made in Germany www mobotix com sales mobotix com...
