Mobotix D25M, Руководство пользователя

Страница: 135 / 140

135
/140
Additional Notes
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Electrical surges: MOBOTIX cameras are protected against the effects of small electrical
surges by numerous measures. These measures, however, cannot prevent the camera
from being damaged when stronger electrical surges occur. Special care should be taken
when installing the camera outside of buildings to ensure proper protection against
light-
ning
, since this also protects the building and the whole network infrastructure.
Max. power consumption of attached extension modules: The power consumption of
all attached MxBus modules must not exceed 2.5 W . When attaching modules to the
MxBus connector
and
the USB connector, the
power consumption of all attached mod-
ules must not exceed 3 W
,
if the camera is powered by PoE class 3
. If
PoE class 2
is
used,
the power consumption of all attached modules must not exceed 1 W!
Never touch the lens:
Due to the high performance of the D25M, the area of the image
sensor can get quite hot , especially when the ambient temperature is also high. This
does not affect the proper functioning of the camera in any way. For this reason, the
product must not be installed within the reach of persons without the dome.
Only exchange sensor module when powered off: Make sure the power supply to the
camera is disconnected before installing or replacing sensor modules.
Network security: MOBOTIX products include all of the necessary configuration options
for operation in Ethernet networks in compliance with data protection laws. The operator
is responsible for the data protection concept across the entire system. The basic settings
required to prevent misuse can be configured in the software and are password-protected.
This prevents unauthorized parties from accessing these settings.
3.7.13 Online Help In The Browser
For more information, see the News and Functional Overview pages in the online help of
the camera’s browser interface. Click on the icon to open the camera’s online help.
Furthermore, detailed information on the camera and its current configuration is displayed
in the
Camera Status dialog box. Click on the icon to open the relevant page.