BulletCamera
MOBOTIX MOVE
BC-4-IR
Quick Install
Страница 1: ...BulletCamera MOBOTIX MOVE BC 4 IR Quick Install ...
Страница 2: ...ter of the two marked holes drill a 30 mm diameter radius as 15 mm cable entry hole Then drill a hole slightly smaller than the supplied plastic screw anchor on each marked screw hole Thread the All in One cable of the camera through the cable entry hole Refer to chapter Camera Cabling for cable connections Match the two screw holes of the camera with the plastic screw anchors at the installation ...
Страница 3: ...he All in One cable and plug the other end of the cable to the network switch or PC NOTE Check the status of both power and network activity indicator LEDs If either LED is unlit please check the corresponding connection All in One Cable No Connector Pin Definition Remarks 1 RJ 45 For network and PoE connections 2 Audio I O Green Audio Out Mic Out Line Out Two way audio transmission Pink Audio In ...
Страница 4: ... 3 Click on the Security tab and select Internet and click on Custom level to change ActiveX settings Step 4 Set ActiveX controls and plug ins items to Prompt or Enable Step 1 Start the IE Internet Explorer IE Step 2 Select Tools from the main menu of the browser Then click on Internet Options Step 3 Click on the Security tab and select Internet Step 4 Down the page click on Default Level and OK t...