manualshive.com logo in svg

Mobius Bionics LUKE Arm, Руководство пользователя

Поделиться
Скачать
Mobius Bionics LUKE Arm Скачать руководство пользователя страница 38

Charging the IMU Battery

Rev 1.8 -- Use or Disclosure of Data Contained on this Page is Subject to the Restrictions on the Inside Title Page of this Document

12/5/16

91

To charge the IMU battery perform the following steps:

1.

Turn 

OFF

 the arm. 

2.

Plug the charging pad’s AC Adapter into an electrical outlet.

3.

Remove the IMU from its shoe mounting clip.

4.

Set the IMU on the charging pad circle. (One IMU per circle).

Ensure the IMU is placed on the pad with the LED facing up, so you can view 
the IMU LEDs.

Table 17. IMU Battery Charging LED Status

Function

Color

Status 

Description

Charging

Blue

Slow Blinking

IMU is performing a self-test.

Fast Blinking

Battery is charging.

NOTE: A fully discharged 
IMU may need to partially 
charge before the LED will 
blink blue. When the IMU is 
on the charging pad, the 
charging pad’s status LEDs 
will be blue.

Solid

Battery is fully charged.

Fault

Amber

Blinking

Indicates a sensor self-test 
has failed. Try resetting the 
IMU by removing it from the 
charging pad, waiting five (5) 
seconds, and then placing 
the IMU on the charging 
pad. If condition continues 
contact Technical Support. 
See 

Contacting Technical 

Support

.

Amber

Solid

Indicates charging has been 
paused. The system should 
recover from this condition. 
If after 30 minutes charging 
does not continue, contact 
Technical Support for service 
on the charger or the IMU. 
See 

Contacting Technical 

Support

.

Содержание LUKE Arm


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды