Mobilogix ATD600S, Руководство пользователя

Страница: 6 / 33

6
2.1.2 Active device
Due to device will go to “Set Up” mode after production, so, before using it, we need active the device, the easy
way to do this is pressing the button for more than three seconds, you can see the green led and blue led blink,
it means device is activated.
Figure 2.3 Button
2.1.3 Config device
There are 3 ways to config the device, such as wireless UART, APP, and over backend, chapter 7 shows you how
to use APP to config the device.
Key items
The APN (username (
apn username ), password ( apn psword )), server URL (and Port) and cellRAT( Network
setting ) we need config at first, otherwise, device cannot make connection established.
Notice:
1: default APN is: mobilogix1.telefonica.com
2: default URL is: mbxiotfusion.mobilogix.com:1883
3: default cellRAT is 3, which support both GSM and eMTC RATs.
Here is the RAT selection
•
0: 2G only
•
1: 2G + NB
•
2: 2G + NB + M1
•
3: 2G + M1
•
4: NB only
•
5: NB + M1
•
6: M1 only
2.2 Installation
Step 1