MobileView 7000 Series, Руководство пользователя

Страница: 48 / 67

MobileView 7000 Series User Manual
40

Video Channel 15 Erratic, Intermittent or Incorrect

Video Channel 16 Erratic, Intermittent or Incorrect

DVR Input Voltage Above Operation Range

DVR Input Voltage Below Operation Range

Device Fuse Fault or Missing

Device Expansion Module Fault or Missing

POE Module Erratic, Intermittent or Incorrect

HDD Caddy Fan Erratic, Intermittent or Incorrect

Accelerometer Erratic, Intermittent or Incorrect

Device 5VDC Output Below Operation Range

Device 12VDC Output Below Operation Range

Event Saved
Note: DVR, NVR, and Device all refer to the recorder.
Supported Messages
The device supports monitoring of the J1939 network for specific message types listed on the Input
Messages configuration tab. The list of supported messages may be updated using the Message
Database tab.
Supported Queries
The device responds to a fixed set of directed queries from the J1939 network. The following are
supported J1939 queries:

Device Firmware ID by Request

Device Make, Model, and Serial Number Request

Device Date-Time by Request

Device GPS Data by Request
Supported Controls
The device reacts to a single control from the J1939 network. The following are supported J1939
controls:

Set device time to value
Configuration Ports and Mode
The Ports and Mode option sets the J1939 network transmit mode.

Listen Mode : Device monitors the J1939 network but does not transmit any data onto the
network.

Active Mode : Device proactively transmits health status to the J1939 network and respond to
queries from the network,