Mobeye ThermoGuard TwinLog CML2275, Руководство пользователя

Страница: 24 / 36

23
6.12 POWER FAILURE DELAY TIME
If the Mobeye CML2275 is powered externally and the power fails it can notify the
contact person(s). The power failure delay time defines the time between the initial
power failure and the alarm notification. If the power is restored within the delay time,
no alarm is sent. The time can be set between 0 and 999 minutes and is only accepted
if the POWERMESSAGE is set to ‘ALARM’. As default, the delay time is set to 0.
SMS command power failure delay time: DELAYPOW:
example: 1111 DELAYPOW:15
6.13 POWER FAILURE MESSAGE
If the Mobeye CML2275 is powered externally and the power fails it sends an SMS
text message to the programmed telephone numbers followed by a call (setting
‘ALARM’), following the on/off settings of ‘CALL’ and ‘SMS’. Power restore results in
an SMS alert to all numbers. This setting
can be set to ‘ALERT’ or ‘OFF’. If the setting
is ‘ALERT’ the power failure message and restore will be sent as SMS to the TEL1
(administrator)
. The setting ‘OFF’ means that no power failure message is sent. The
default setting for the ‘power failure message’ is set to “ALARM”.
SMS command power failure message: POWERMESSAGE:ALARM
(or ALERT or OFF )
example: 1111 POWERMESSAGE:ALERT
6.14 UNIT OF TEMPERATURE
The temperature can be programmed and displayed in degrees Celsius (C) or
Fahrenheit (F). If the unit was set to F, the temperature limits can be set between
-30 °F and 158 °F. As default this unit is set to C.
SMS command unit of temperature:
TEMPUNIT:
example: 1111 TEMPUNIT:F