12
6.
MOUNT THE CM4410 AND PERFORM A TEST
6.1
MOUNT THE CM4410 HOUSING TO THE CEILING
Mount the housing in which the module is fixed to the desired place to the ceiling,
using the plugs and screws which can be found inside the Ei Electronics box. Please
refer to the Ei Electronics manual for the ideal location and installation method.
6.2
CONNECT THE EI DETECTOR AND CLOSE THE COVER
Remove the back cover from the Ei Electronics detector. The
CM4410 will be used as back cover.
Press the green cabled connector to the pins of the Ei
Electronics detector. Next to the pins the text 1 2 is written.
Be sure that the (in most situations) grey connector in the Ei
Electronics detector was removed.
Hold the
EI detector to prevent tension on the wires!
Bring the Ei Electronics detector and the back cover with GSM module to each
other at the correct position and turn the detector gently clockwise until it is closed
and locked. In the EI detector a red light will flash regularly.
