Mobatime DTS 4128.timeserver, Инструкция по эксплуатации

Страница: 74 / 84

© MOBATIME 74 / 84 800847.08
C Alarm list
Number Error message Description / Action
0 Reboot DTS DTS 4128 restarted, no intervention required
1 Error bit1 Not used
2 Supply voltage too low Power failure (internally measured) -> support
3 Error bit3 Not used
4 Error bit4 Not used
5 Error bit5 Not used
6 Error bit6 Not used
7 Error bit7 Not used
8 Wrong time zone DCF Check DCF configuration
9 Error bit9 Not used
10 Error bit10 Not used
11 Error bit11 Not used
12 Error bit12 Not used
13 Error bit13 Not used
14 Error bit14 Not used
15 Error bit15 Not used
16 Time source lost Stratum too high: check time source
17 Failure time source TO
No time information from the selected time source within the
configured timeout: Check time source.
In slave mode: check link.
18 No valid time 20 min after starting no valid time -> Check time source
19 NTP synch. lost Check NTP source
20 Software trimming Quartz error or poor source quality
21 NTP not working Check NTP configuration
22 Offset source (slave) Only as slave: check source
23 Syn only diff too great Check synchronization and source
24 Mail config. wrong Check e-mail configuration
25 SNMP not working Check SNMP and trap configuration
26 Error bit26 Not used
27 Error bit27 Not used
28 Error bit28 Not used
29 Error bit29 Not used
30 No opt. link
No connection via DTS link (optical link) in redundant operation.
Check connection.
31 No link (LAN)
No connection via LAN link in redundant operation. Check LAN
connection.
32 Switch over slave -> master
Switch over slave -> master is occurred. Check ev. the time source
of current slave.
33
Difference between slave and
local time source too large
In slave mode only: check time sources
34 Local time source lost In slave mode only: check time sources
35 - 63 Error bit35 - 63 Not used