Mobatime 122031, Монтаж и инструкция по эксплуатации

Страница: 75 / 124

© MOBATIME 75 / 124 801214.10
Save the current configuration via USB-Stick:
The whole procedure can be analogously done with an USB stick.
The copy procedure to the USB stick can be started on DTS 4160 by selecting the
menu '3. Maintenance'

’3. Backup configuration and log to USB’ and press ENTER.
All files (including telegram files) will be copied into the root directory of the USB stick.
Copy configuration to another DTS 4160:
In order to copy the entire configuration or elements of it from a DTS device to another,
the according assistant in MOBA-NMS can be used. For this, select the source device
(from which the configuration shall be transferred) and start the assistant in the menu
‘Edit‘

‘Transfer configuration…‘. It will lead you through the individual steps.
Without MOBA-NMS, perform the procedure explained in chapter 7.3 resp. 7.5.
Notice:
When copying the configuration from one DTS 4160 to an other, the IP
address may have to be changed after the download by serial connection.
7.10 Copying Telegram files to the DTS 4160.grandmaster
Analogously to the previously described procedures telegram files can be copied via
FTP or USB stick to the DTS 4160.
The copy procedure can be started on DTS 4160 by selecting the menu
'3. Maintenance'

’8. Copy telegram-files' and press ENTER. Afterwards, select again
in the menu “6.5.4 Serial interface“ and reload.
The files are stored in the directory /var/local/dts and can be deleted or copied via
FTP.
Special case USB stick:
If the DTS recognizes the insertion of an USB stick, it is shown on the display. By
pressing the red button the copy procedure can be released (analogously to the above
described procedure). The button has to be pressed until the copy procedure is started.
Management with MOBA-NMS:
With MOBA-NMS, the files do not need to be copied manually via FTP or USB stick,
since this is already integrated in the MOBA-NMS operation. At every file selection, the
‘Change…‘ link can be clicked. This opens a file dialog which shows all files and allows
new files to be loaded onto the device or existing ones to be deleted.
Example of a program file choice:
Notice:
After the file copy procedure, the output of the telegram files are re-started
(take over of the files).
Notice:
The file name is limited to 8 characters before the dot, e.g. IF482Std.tel
Link for opening the file
dialog for editing the file list.