Mobatime 122031, Монтаж и инструкция по эксплуатации

Страница: 28 / 124

© MOBATIME 28 / 124 801214.10
6.5.2 DCF – output
The DTS 4160 is equipped with 1 DCF output line (electrical current loop DCF output).
DTS 4160.grandmaster Moser-Baer AG
====================================
DCF OUTPUT 1
1 Mode (0=off, 1=on) 1
2 Time zone [0] UTC
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

1 Outputs

1 DCF outputs

DCF out 1
1.
Select line function: off or DCF on
2. Select time zone

see chapter 6.5.30 Time zone selection.
6.5.3 Pulse / Frequency output / 10 MHz output
The DTS 4160 is equipped with 2 pulse / frequency interfaces. The signals are
available on the BNC connectors Pulse and 10 MHz.
In addition, 1 of the pulse / frequency outputs is available as 1PPS on RS422 output
(Pulse Out) and current loop (Pulse Out) output.
DTS 4160.grandmaster Moser-Baer AG
====================================
PULSE / FREQUENCY OUTPUT 1
1 Mode 1PPS
98 Return and save
99 Return and discard changes
ESC=back
Mode 0=off, 1=10MHz, 2=2.048MHz, 3=1PPS, 4=2Hz>
Enter desired menu number>
Path: 2 Configuration

1 Outputs

2 pulse / frequency outputs

1 pulse / frequency out 1
1. Select line function: 0 = Off
1 = 10 MHz output
2 = 2.048 MHz output
3 = 1 pulse per second
4 = 2 Hz