MLB-G3001 Terminal User Guide
37
Rev 1.1
The default value applies automatically if no other address is set. Note that the
AT^SICS read command only returns a manually configured IP address, while
the value "0.0.0.0" is not indicated at all, no matter whether assumed by default
or explicitly specified.
See also note below.See also note below.
< conParmValue >
(str)
Parameter value; type and supported content depend on related <conParmTag>.
< conParmValue − conType >
(str)
Supported connection type values in <conParmValue> for <conParmTag> value "conType".
GPRS0
GPRS connection.
However, for each configured connection profile there must be a free PDP
context in AT+CGDCONT. After entering AT^SISO MLB-G3001 automatically
tries to attach to a Packet Domain. Yet, the only exception is AT+CGATT which
can be used any time to detach from the Packet Domain and thus disconnect
the bearer opened with AT^SISO.
none
Clears the connection profile.
The list below shows which <conParmTag> parameters are mandatory (= m) or optional (= o).
<conParmTag>
<conParmValue-conType> GPRS0
"conType"
m
"user"
o
"passwd"
o
"apn"
m
"inactTO"
o
"dns1"
o
Table 6: Applicability of AT^SICS <conParmTag> values
Содержание MLB-G3001
Страница 56: ...MLB G3001 Terminal User Guide 56 Rev 1 1 Notes...
Страница 57: ...MLB G3001 Terminal User Guide 57 Rev 1 1...
