MKS Stabil-Ion 370 Series, Инструкция по эксплуатации, Страница: 13 / 122

Safety
ix
Series 370 Stabil-Ion Instruction Manual - 370119
Certification
MKS Instruments, Inc. certifies that this product met its published specifications at the time of shipment from
the factory. MKS Instruments further certifies that its calibration measurements are traceable to the National
Institute of Standards and Technology to the extent allowed by the Institute's calibration facility.
Warranty
MKS Instruments, Inc. provides a warranty period of 18 months from the date of shipment for the Series 370
Controllers. The MKS General Terms and Conditions of Sale provides the complete and exclusive warranty for
MKS products.
Service Guidelines
Some minor problems are readily corrected on site. If the product requires service, contact the MKS Technical
Support Department at +1-833-986-1686. If the product must be returned to the factory for service, request a
Return Material Authorization (RMA) from MKS. Do not return products without first obtaining an RMA. In
some cases a hazardous materials disclosure form may be required. The MKS Customer Service
Representative will advise you if the hazardous materials document is required.
When returning products to MKS, be sure to package the products to prevent shipping damage. Shipping
damage on returned products as a result of inadequate packaging is the Buyer's responsibility.
For Customer Service / Technical Support:
MKS Global Headquarters
2 Tech Drive, Suite 201
Andover MA, 01810 USA
Phone: +1-833-986-1686
Email: insidesales@mksinst.com
Visit our website at: www.mksinst.com
FCC Verification
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and the receiver.
■
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■
Consult the dealer or an experienced radio or television technician for help.