MKS MKS TFT28, Руководство пользователя

Страница: 20 / 45

Ⅴ
.The network printing function
MKS TFT28/32 Need to use MKS TFT-WIFI to achieve network printing.
5.1 Introduction to Print Mode
1. Cloud Print Mode: Recommended for use in a WiFi router environment with Internet access. Once you
have a network connection to the WiFi module, the printer becomes the online printer on the cloud.Access
to the app or control printer anywhere in the world. can also be in the local area network through the host
computer (Printrun, etc.) to control the printer.
2. LAN Print Mode: Recommended in the case of a WiFi router, but the router is not available on the Internet
or the network is slow (the cloud Print mode printer responds too slowly).
3 . AP printing mode:When the printer is in an environment where there is no WiFi router, the WiFi module
is not configured, the WiFi module is configured, but the network environment is not good enough to
connect to the router, the above three cases are entered by default.At this time the WiFi module will
produce hot "mkswifi-xxxx" (open hotspot, no password), you can access the hotspot through the app,
browser, host computer (Printrun, etc.) to control the printer.
4 . WebServer print mode: special mode, not recommended. This mode also controls the printer in the LAN.
It can be controlled by the computer's Web, transfer files, print, etc. It can't use the APP control. You need to
brush the Web version firmware to use it.
5.2 Cloud Print Mode
1 .Network Diagram