background image

                                                                                                                                             

vii

                                                                    

EDH0387En1020 — 09/18

BG Series                                                                                                                  Goniometric Cradles

Warnings

WARNING

The motion of objects of all types carries potential risks for operators.
Ensure the protection of operators by prohibiting access to the dangerous
area and by informing the personnel of the potential risks involved.

WARNING

Do not use this stage when its motor is emitting smoke or is unusually
hot to the touch or is emitting any unusual odor or noise or is in any
other abnormal state.

Stop using the stage immediately, switch off the motor power and then
disconnect the electronics power supply.

After checking that smoke is no longer being emitted contact your
Newport service facility and request repairs. Never attempt to repair the
stage yourself as this can be dangerous.

WARNING

Make sure that this stage is not exposed to moisture and that liquid does
not get into the stage.

Nevertheless, if any liquid has entered the stage, switch off the motor
power and then disconnect the electronics from power supply.

Contact your Newport service facility and request repairs.

WARNING

Do not insert or drop objects into this stage, this may cause an electric
shock, or lock the drive.

Do not use this stage if any foreign objects have entered the stage.
Switch off the motor power and then disconnect the electronics power
supply.

Contact your Newport service facility for repairs.

WARNING

Do not place this stage in unstable locations such as on a wobbly table or
sloping surface, where it may fall or tip over and cause injury.

If this stage has been dropped or the case has been damaged, switch off
the motor power and then disconnect the electronics power supply.

Contact your Newport service facility and request repairs.

WARNING

Do not attempt to modify this stage; this may cause an electric shock or
downgrade its performance.

WARNING

Do not exceed the usable depth indicated on the mounting holes (see
section “Dimensions”). Longer screws can damage the mechanics or
cause a short-circuit.

Содержание BGM120































Отзывы: